Delta A15097 Instrukcja Użytkownika Pobierz pdf (Strona 11)

Fig. 9

SUPPORT

1. Place the support (A) Fig. 10 inside the two side

supports (B). NOTE: MAKE SURE SUPPORT IS

ATTACHED TO THE SIDE SUPPORTS CLOSEST

TO THE MOTOR.

2. Align the four holes in the support with the four

holes in the side supports as shown in Fig. 10.

3. Insert a 5/16-18x3/4" hex head screw (A) Fig. 11,

thru the side supports and the support.

4. Place a 5/16" lockwasher on the hex head screw.

5. Thread a 5/16-18 hex nut on the hex head screw

and tighten securely.

6. Repeat this process for the three remaining holes for

attaching the support.

7. Fig. 12 shows the support attached to the side

supports.

Fig. 10

Fig. 12

Fig. 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Brak uwag

Delta A15097 Instrukcja Użytkownika Strona 11