Delta GR150 Instrukcje Operacyjne Pobierz pdf (Strona 5)

60708-153

Page 3

1285-00

The rated power of each engine-generator is limited by the

temperature, altitude and all other ambient conditions specified

by the engine manufacturer. Engine power will decrease 3-1/2%

for each 1000 ft. above sea level, and will decrease an additional

1% for each 10 degrees Fahrenheit above 60 degrees Fahren-

heit. Units should not be operated in ambient temperature greater

than 125 degrees Fahrenheit.

GENERATOR:

WINPOWER Generators Sets use totally brushless, AVR (Auto-

Voltage Regulator) controlled broad-range generator ends. The

generator converts rotational mechanical energy into electrical

energy. Standard WINPOWER units are equipped with genera-

tors manufactured by Stamford/Newage. Each generator ‘end’

has its own data tag. The unique serial number is stamped on the

data plate and into the upper section of the mounting adapter of

the generator frame. The data label is affixed to the main frame

of the generator on the lower left side, similar to the sample

shown.

ENGINE CONTROL PANEL LAYOUT

SPECIFICATIONS

GENERATOR SET:

Every WINPOWER Generator Set has its own unique identity data

plate. This data plate identifies the complete unit model number,

the system serial number and has links to the individual compo-

nents that form the generator set in our factory records. Several of

the major components also have their own individual identity plates

providing additional information to document build data for warranty

and replacement parts.

Be sure to have the main WINPOWER unit data plate information

recorded inside the front cover of this manual for future reference

and for identification whenever requesting field or factory technical

assistance. Sample data plate is shown for reference. Primary fields

needed for assistance are complete model number, serial number

and especially the M-Spec number. The M-Spec number (if pro-

vided) is recorded in the ‘TYPE NO.’ block on the Lower Right of the

plate. See the appendixes in the back of this manual for individual

units specifications and wiring diagram references.

ENGINE:

Each engine has a nameplate on it that gives the specific engine

model number, build specification and the serial number for the

engine. See the technical data pages in the back of this manual

for individual engine specifications, fuel consumptions and wiring

diagram references.

This manual covers specific operation of the combined engine

generator set. Refer to engine operating and maintenance

instructions for specific instruction on the care and maintenance

of the engine. Oil and fuel requirements along with maintenance

schedules and engine warranty information are provided by the

individual engine manufactures.

** CAUTION **

EQUIPMENT DAMAGE - Be sure to check the engine oil level

frequently as specified in the engine manual.

The engine manufacturer has established an excellent worldwide

engine service organization; engine service is available from a

nearby authorized dealer or distributor; check the Yellow Pages

of the telephone directory under “engines,” or ask the dealer from

whom you purchased the power plant.

Typical Winpower Nameplate

1 2 3 4 5 6 7 8 9 10 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Delta GR150 Instrukcje Operacyjne Strona 5

Komentarze do niniejszej Instrukcji