Delta AH500 series Instrukcja Obsługi Pobierz pdf (Strona 23)

AH500 Quick Start

3. A pump

The pump is installed near the underground pool. However, the device to which the PLC

actually connects is not the pump but the control panel. Generally speaking, three digital inputs

and one digital output are connected to the digital input/output module. (Remote control x 1 (DI)

& Run x 1 (DI) & Trip x 1 (DI) & Start x 1 (DO))

4. A level meter

The level meter is installed in the underground pool, and the signal contact is connected to the

analog input module. (0~10V correspond to 0~10M. 0 V represents that the water is 0.0 meters

deep, and 10 V represents that the water is 10.0 meters deep.)

The control condition of the pump:

1. Start: If the water level inside the water tower is low and that inside the underground pool is not

low, the pump will refill the water tower.

2. Stop: If the water level inside the water tower is high, or if the water level inside the

underground pool is low, the pump stops running.

2.5

Creating Projects

After users install the hardware and understand the control logic in the example, they can write the

program.

Step 1: Open ISPSoft (StartÆProgramsÆ Delta Industrial

AutomationÆPLCÆISPSoftx.xxÆISPSoftx.xx)

The start screen of the software:

Entering the main screen of the software:

Step 2: Click

to create a project. The example is related to the water supply, and therefore the

project name is SPW. The PLC type is AHCPU530-EN, and the file path is the default path.

Finally, click

2-12

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 60 61

Brak uwag

Delta AH500 series Instrukcja Obsługi Strona 23